Name
SINOPEC SED
Owner
/ Sinopec Research Institute of Petroleum Processing Co., Ltd.
Brand
Sulfolane Extractive Distillation
Process
Separation Processes
Type
Separation via Extractive Distillation
Available
Insight Articles
#TE430
sulfolane extractivedistillation aromaticsextraction sinopec btx aromaticscomplex benzene toluene xylene sed sedbtx liquidliquidextraction lle

Description

1. Summary

SED (Sulfolane Extractive Distillation) is an aromatics recovery technology developed by the Sinopec Research Institute of Petroleum Processing (RIPP) and licensed by China Petrochemical Technology Co., Ltd. (SINOPEC TECH). It recovers high-purity benzene, or benzene and toluene, from hydrocarbon mixtures such as hydrogenated pyrolysis gasoline, reformate and coal tar oil, using a complex solvent system composed of sulfolane as the main selective solvent and a proprietary co-solvent [1][2]. A typical SED unit consists of an extractive distillation (ED) column and a solvent recovery column operating under vacuum; in benzene-recovery service the benzene product leaves the unit directly, while in benzene/toluene service the mixed aromatics are separated by downstream fractionation [1].

The defining innovation over conventional sulfolane liquid–liquid extraction (LLE) is the elimination of the liquid–liquid extractor and the associated aromatic reflux, which the licensor states reduces capital investment and operating costs by about 30% and solvent consumption by about 70% relative to the sulfolane LLE process [1]. The solvent chemistry is protected by a patent family whose core patent, CN 1172886C / US 7,078,580 B2 (priority 2001), specifies a three-component solvent — main solvent, C8–C11 aromatic solutizer (3–39 wt%) and an acid/base “modifier” opposite in polarity to the main solvent — which moderates solvent-recovery conditions, raises aromatics yield and produces neutral benzene without downstream clay treatment [12]. A characteristic design feature is that the ED column is operated in the “critical mutual-solubility zone” of the solvent–hydrocarbon system, which widens the operating window and gives stable control [9]. The first commercial plant went onstream in 2001 [1][3]; the flagship early application is the 550 kt/a aromatics extraction unit of Shanghai SECCO's 900 kt/a ethylene project, which passed its 72-hour performance test with benzene purities of 99.96–99.98 % and recoveries above 99.5 % [6]. A 2010 licensor survey counted 11 SED units totalling 1.2 Mt/a of benzene and 240 kt/a of toluene commissioned since 2006 [1]; by 2017 RIPP reported 59 industrial units with a combined feed capacity of 18 Mt/a and more than 90% of the Chinese domestic market [3]. The second generation, SED-BTX, organically combines extractive distillation with liquid–liquid extraction and was applied in 2024 on a 350 kt/a plant treating hydrogenated catalytic-cracked gasoline, with comprehensive energy consumption 25% below a conventional LLE benchmark [5].


2. Technology snapshot

Item Data
Owner / developer SINOPEC Research Institute of Petroleum Processing (RIPP) [2][3]
Licensor China Petrochemical Technology Co., Ltd.
(SINOPEC TECH) [1]
Process family Aromatics extraction by extractive distillation;
second generation SED-BTX combines ED
with liquid–liquid extraction [1][5]
Core solvent Sulfolane (main solvent) + co-solvent [1][2];
composite solvent = main solvent + C8–C11
aromatic solutizer + polarity modifier [12]
Typical feeds Hydrogenated pyrolysis gasoline, reformate,
coal tar oil (crude benzene) [1][2];
hydrogenated FCC gasoline (SED-BTX) [5]
Products High-purity benzene; benzene + toluene
(via downstream fractionation) [1]; 
BTX (SED-BTX) [5]
Core equipment Extractive distillation column
+ solvent recovery column (vacuum) [1][4]
First commercial unit 2001 [1][3]
Units 
(licensor survey 2010)
11 units since 2006;
1.2 Mt/a benzene + 240 kt/a toluene [1]
Units (RIPP reviews) >40 units, largest single train 1 Mt/a (2015) [9];
59 units, 18 Mt/a feed capacity,
>90% domestic market share (2017) [3]

3. Process history and ownership

SED was developed at RIPP, the central research institute of SINOPEC founded in 1956, within its aromatics-process portfolio that also includes the sulfolane liquid–liquid extraction process (SAE), styrene extractive distillation (STED) and C8 aromatics isomerization [3][9]. The development pathway documented in the patent record runs as follows:

Year Milestone
2000 CN 1262264A / CN1125008C filed: combined extractive distillation–liquid–liquid extraction process recovering benzene directly from a pre-fractionated high-benzene fraction, aimed at revamp/expansion of existing LLE units; steam consumption 22%+ below pure LLE in the patent examples [11].
2001 First commercial SED plant onstream [1][3]. CN 1172886C / US 7,078,580 B2 filed (priority June 29, 2001): three-component composite solvent (main solvent + C8–C11 aromatic solutizer + modifier) for aromatics recovery by extractive distillation [12].
2002 Industrial application of the sulfolane ED–LLE combination documented in the Chinese literature [10].
2005 SED unit of Shanghai SECCO's 900 kt/a ethylene project onstream; the SECCO complex, a Sinopec/BP/Sinopec Shanghai Petrochemical joint venture, was the first of China's three ethylene mega-projects to start up in 2005 [1][6][19].
2006–2010 11 further SED units commercialized by SINOPEC, totalling 1.2 Mt/a benzene and 240 kt/a toluene of capacity [1]; parallel heat-exchange energy-saving variant patented (CN 101091835B) [16].
2009 1 Mt/a SED unit commissioned at Dalian Fujian (Dalian Changxing Island); at that time the largest single SED train [3][9].
2010 SED-I improvement introduced for benzene-only service, with about 20% lower energy consumption [9].
2012–2019 Solvent chemistry extended: sulfone-derivative co-solvent systems (CN 108997077A, 2017) [14] and water-free glycol-ether co-solvent systems (CN 111978143A, 2019) [15].
2018–2023 SED-BTX hybrid process patented (CN 111954654B, priority Feb 1, 2018; PCT WO2019149212A1; granted Mar 17, 2023) [13]; applied on a 350 kt/a plant treating hydrogenated catalytic-cracking gasoline with one-run start-up (published 2024) [5].
2022–2025 Process extended to full-range gasoline C6–C11 aromatics recovery via LLE+ED combination (CN 117343758B) [17].
2026 SED-BTX selected for the Tarim Phase-II ethylene project; unit reported with more than 500 hours of stable operation at time of announcement, 100% localization rate [18].

Licensing and technical services are provided by China Petrochemical Technology Co., Ltd. (SINOPEC TECH), the technology-licensing arm of SINOPEC [1].


4. Process summary and solvent chemistry

4.1 Separation principle

SED is a physical separation process; no chemical reaction or catalyst is involved. Extractive distillation exploits the different effect of a selective solvent on the relative volatilities of the feed components: in the presence of the polar solvent the relative volatility of non-aromatics (paraffins, naphthenes) relative to aromatics increases sufficiently for the non-aromatics to be distilled overhead, while the aromatics remain dissolved in the solvent and leave with the column bottoms [12][4]. This makes the route particularly suitable for high-aromatics feeds: conventional LLE requires raffinate blending when the aromatics content exceeds roughly 70 wt% to keep the extractor in operation, whereas extractive distillation handles high-aromatics feed directly without blending [11][12].

4.2 Composite solvent system

The core patent family specifies a three-component solvent [12]:

  • Main solvent — selected from sulfolane (tetrahydrothiophene-1,1-dioxide) derivatives, N-formylmorpholine or N-methylpyrrolidone; preferred sulfolane, 2-methylsulfolane or 2,4-dimethylsulfolane [12].
  • Solutizer (co-solvent) — one or a mixture of two C8–C11 aromatics (e.g. xylene, cumene) at 3–39 wt%, with the carbon number of the lowest aromatic in the solutizer greater than the highest aromatic being separated. The solutizer raises solvent dissolving power, increases aromatics recovery and moderates the severity of solvent recovery [12]. The earlier combined-process patent used 0.1–15 wt% (preferably 3–8 wt%) of C8–C10 aromatics, preferably xylene, for the same purpose [11].
  • Modifier — 0–10 wt%, chosen with acidity/basicity opposite to the main solvent (e.g. N-formylmorpholine opposite sulfolane, or sulfolane opposite N-formylmorpholine). In the patent examples the modifier reduced sulfur in the benzene product to 0.2 ppm and delivered a neutral product, eliminating post-treatment of the benzene [12].

The ED circuit is operated with a water-free solvent: water in the extractive distillation solvent lowers the dissolving power and degrades benzene quality [11]. Later solvent generations trade off this constraint: CN 108997077A (2017) blends 40–80 wt% sulfolane with 20–60 wt% of a sulfone-family co-solvent to reduce solvent circulation energy [14], and CN 111978143A (2019) uses a sulfone or tetraethylene-glycol main solvent (65–91 wt%) with 9–35 wt% glycol-ether co-solvent in a water-free system with low corrosivity [15]. By contrast, in the SED-BTX hybrid the LLE section deliberately uses sulfolane containing 0.1–1.0 wt% water (preferably 0.4–0.8 wt%) to raise solvent selectivity [13].


5. Detailed process description

5.1 Flow scheme

The typical SED unit consists of an extractive distillation column and a solvent recovery column [1][4].


Figure 1 – SED core configuration (after RIPP technology documentation and the patent flow scheme)

5.2 Step-by-step description

  1. Feed introduction. The hydrocarbon feed is pre-heated and enters the middle section of the extractive distillation column [12]. Feedstocks include hydrogenated pyrolysis gasoline, reformate and coal tar oil; in SED-BTX service the feed is hydrogenated catalytic-cracked gasoline [1][5].
  2. Extractive distillation. Lean composite solvent is introduced near the top of the ED column and flows downward counter-currently to the rising vapour. Non-aromatics are distilled overhead; the aromatics dissolve into the solvent and leave the column bottoms as rich solvent [4]. The overhead is condensed; part may be returned as reflux [12].
  3. Solvent recovery. The rich solvent enters the solvent recovery column, which operates under vacuum (patent range 0.04–0.10 MPa top pressure) [12]. Aromatics and any water vapour leave overhead and are condensed; the aromatics product separates in the reflux drum. In benzene-only service the benzene is produced directly at this point; in benzene/toluene service the mixed aromatics proceed to downstream fractionation [1].
  4. Solvent recycle and regeneration. Lean solvent from the recovery-column bottoms is heat-exchanged against the rich solvent and returned to the top of the ED column. A small slipstream is routed to a solvent regenerator to purge heavy polymers and oxidation products [11][12]. An energy-saving variant splits the lean-solvent recycle into two heat-exchange branches returning at different column heights, improving temperature control and separation efficiency (CN 101091835B) [16].
  5. SED-BTX hybrid variant (second generation). For wide-boiling, high-aromatics feeds such as hydrogenated FCC gasoline, the ED overhead — controlled to carry 3–30 wt% (preferably 10–30 wt%) benzene together with the C8 naphthenes — is routed to a liquid–liquid extraction column instead of being discharged as raffinate. The benzene-containing rich solvent from the LLE column returns to the upper-middle section of the ED column (stages 2–9 below the solvent inlet), so that the benzene missed by the ED section is recovered in the same solvent loop, while C8 naphthenes leave with the LLE raffinate. The LLE raffinate is water-washed at 35–45 °C to recover entrained solvent [13]. This combination removes the C8+ naphthene ceiling that limits single-column ED on wide cuts (toluene purity limited to ~99.7 wt% and mixed xylenes to ~97 wt% without the hybrid) and achieves BTX purities of 99.99 / 99.90–99.93 / 99.0 wt% respectively [13].

5.3 Process parameters and conditions

Published ranges (US 7,078,580 B2 claims and examples) [12]; combined-process values from CN 1262264A [11]; SED-BTX values from CN 111954654B [13]:

Parameter ED column Solvent recovery column
Top pressure 0.10–0.30 MPa [12] 0.04–0.10 MPa [12]
Lean/rich solvent inlet temperature 80–130 °C [12] 125–175 °C [12]
Bottoms temperature 130–180 °C [12] 160–190 °C [12]
Solvent/feed weight ratio 3.0–7.0 [12] —
Reflux ratio 0.1–3.0 [12] 0.5–2.5 [12]
Theoretical stages 10–40 [12] 10–25 [12]
Solvent water content ED solvent water-free (combined process); LLE circuit of hybrid process 0.1–1.0 wt% water [11][13]
Co-solvent content (solutizer) C8–C11 aromatics 3–39 wt% [12]; 0.1–15 wt% (preferably 3–8 wt%) in the combined-process variant [11]
SED-BTX: benzene in ED overhead to LLE 3–30 wt% (preferably 10–30 wt%) [13]
SED-BTX: benzene-rich solvent return Stages 2–9 below solvent inlet of ED column [13]
SED-BTX: extraction tower 3–30 stages; solvent inlet 40–90 °C; solvent ratio 1–3 [13]

Note: RIPP does not publish a complete licensor design envelope; the values above are patent-declared ranges. Commercial design conditions are project-specific.


6. Technology performance

6.1 Product quality and recovery

Case Results
Patent examples on hydrogenated pyrolysis gasoline and reformate C6 cut [12] Benzene purity 99.96–99.98 wt%; sulfur 0.2 ppm with modifier (<2 ppm without); neutral product without post-treatment; benzene recovery 99.6% on reformate; aromatics in raffinate 0.32 wt%
Shanghai SECCO 550 kt/a unit, 72-h performance test and long run [6] Benzene purity 99.96–99.98%, recovery >99.5%; toluene purity 99.90–99.92%, recovery >98.5%; total energy consumption below design target; solvent consumption very low, despite feed composition differing from design values
SED-BTX 350 kt/a plant on hydrogenated FCC gasoline [5] Benzene yield 99.9% at 99.99 wt% purity; toluene yield 99.9% at 99.98 wt% purity; raffinate non-aromatics >99.3 wt%; sulfolane in raffinate <1 μg/g
SED-BTX patent examples [13] B/T/X purities 99.99 / 99.90–99.93 / 99.0 wt%; C8 naphthenes in mixed aromatics reduced to 0.019–0.054 wt%; benzene in raffinate ~0.1 wt%

6.2 Energy consumption

  • SED-BTX comprehensive energy consumption including the fractionation section: 56.6 kgOE/t feed (1 kgOE = 41.8 MJ), stated as 25% lower than the traditional liquid–liquid extraction process [5].
  • Combined ED–LLE process (CN 1262264A comparative basis): total steam 0.975 t/t feed versus 1.257 t/t for pure LLE (−22%); solvent make-up 0.10–0.15 kg/t feed versus 0.18–0.20 kg/t [11].
  • The composite solvent moderates solvent-recovery severity: with a sulfolane + solutizer + modifier system the recovery column operates at about 0.045 MPa / 186 °C bottoms against 0.038 MPa / 201 °C for pure N-formylmorpholine, avoiding nitrogen contamination of the toluene product and the associated clay post-treatment [12].

6.3 Safety and environment

  • Closed solvent loop with vacuum stripping and a purge regenerator; solvent consumption is a key performance indicator, reported as very low in commercial operation and roughly 70% below sulfolane LLE in licensor material [1][6].
  • Sulfolane in the raffinate product is controlled to <1 μg/g in SED-BTX operation [5].
  • Water-free ED solvent operation avoids the solvent-containing aqueous streams of water-containing ED variants; in the hybrid process wash water is stripped and reused [11][13].
  • Feed is hydrotreated upstream (e.g. pyrolysis gasoline hydrogenation), so the extraction section handles low-sulfur material; benzene product sulfur of 0.2 ppm is documented at patent scale [12].

7. Comparative economic performance

SED competes with sulfolane liquid–liquid extraction (RIPP SAE, UOP Sulfolane, Axens ParamaX), N-formylmorpholine extractive distillation (Morphylane-type) and other Chinese ED processes. Licensor-declared comparisons:

  • Capital investment and operating cost: about 30% lower than the sulfolane LLE process (Hydrocarbon Processing 2010 licensor survey) [1]; RIPP's own technology page states investment and operating cost 10–20% lower than LLE [3]. The two licensor statements differ; both are quoted here as declared.
  • Solvent consumption: about 70% lower than the sulfolane LLE process [1].
  • Feed flexibility: handles hydrogenated pyrolysis gasoline, coal tar oil and reformate without raffinate blending at high aromatics content, unlike LLE which is best suited to 30–70 wt% aromatics feeds [1][12].
  • Against conventional single-column ED on wide C6–C8 cuts, the SED-BTX hybrid removes the C8 naphthene ceiling and reaches LLE-equivalent purities at 25% lower energy than conventional LLE [5][13].

No independent same-basis (third-party) economic comparison of SED against competing licensed technologies was located in the reviewed sources; the figures above are licensor-declared.


8. Commercial experience and deployments

 

SED is the dominant aromatics extractive-distillation technology in China: RIPP claims more than 90% of the domestic market [3]. Growth of the installed base:

  • 2001: first commercial unit [1][3]
  • 2006–2010: 11 units, +1.2 Mt/a benzene and +240 kt/a toluene capacity [1]
  • 2010: SED-I variant for benzene-only service, ~20% lower energy [9]
  • 2017: 59 units, 18 Mt/a combined feed capacity [3]
  • 2024–2026: second-generation SED-BTX deployed on hydrogenated FCC gasoline service and selected for new grassroots ethylene complexes (Tarim Phase-II) [5][18]
Site / project Facts
First commercial SED unit (China) Onstream 2001 [1][3]
Shanghai SECCO, Shanghai Chemical Industry Park (Sinopec/BP/Sinopec Shanghai Petrochemical JV) 550 kt/a aromatics extraction unit of the 900 kt/a ethylene project; complex start-up 2005; 72-h performance test passed with benzene 99.96–99.98% at >99.5% recovery and toluene 99.90–99.92% at >98.5% recovery [6][19]. The 2010 licensor survey lists a 350,000 tpy SED unit at SECCO onstream in 2005 [1] — the capacity basis differs from the journal paper (see Notes).
SINOPEC Huizhou Refinery (Huizhou, Guangdong) SED applied in the 780 kt/a PX project; performance test and long-term running met all design targets despite feed deviations [7]
SINOPEC (Henan) Refining & Chemical, Phase-II expansion Sulfolane ED selected for the aromatics unit; design specifications attained or exceeded; operating capacity reported at the design value of 15,680 t/a [8]
Dalian Fujian (Dalian Changxing Island) 1 Mt/a SED unit commissioned 2009 — at the time the largest single SED train [3][9]
SED-BTX 350 kt/a industrial plant (hydrogenated catalytic-cracking gasoline) One-run start-up; benzene and toluene yield 99.9% each; energy 56.6 kgOE/t, 25% below conventional LLE [5]
Tarim Phase-II ethylene project SED-BTX selected; more than 500 h stable operation at time of the August 2026 report; 100% localization rate [18]
Aggregate (licensor survey 2010) 11 SED units since 2006; 1.2 Mt/a benzene + 240 kt/a toluene [1]
Aggregate (RIPP, by 2017) 59 industrial units; 18 Mt/a feed capacity; benzene and toluene output stated at 6.4 and 6.6 Mt/a respectively; >90% domestic market share [3]


SED is also used within SINOPEC's integrated aromatics-complex technology suite; RIPP's aromatics-complex review covers SED alongside reforming, disproportionation/transalkylation, xylene isomerization and adsorptive p-xylene separation, commercialized in the 600 kt/a PX complex at Hainan refinery [9].

Chinese aromatics demand growth continues to be driven by the para-xylene/polyester chain; SED and SED-BTX serve both the reformate route and the growing pyrolysis-gasoline and catalytic-cracking-gasoline aromatics routes. The reviewed sources do not provide an independently verifiable global capacity figure beyond the licensor statements above.


9. Patent portfolio (key titles)

Patent / family Priority Subject
CN 1262264A / CN1125008C 2000-02-01 Combined extractive distillation – liquid-liquid extraction process; direct benzene recovery; retrofit of existing LLE units [11]
CN 1172886C / US 7,078,580 B2
(also DE, FR, JP family)
2001-06-29 Composite solvent (main solvent + C8–C11 aromatic solutizer + acid/base modifier) and ED process operating envelope [12]
CN 101091835B 2006-06-22 Parallel heat-exchange ED method; two-temperature lean-solvent return [16]
CN 108997077A 2017-06-07 Sulfolane (40–80 wt%) + sulfone-derivative co-solvent (20–60 wt%) system [14]
CN 111978143A 2019-05-23 Water-free sulfone/glycol + glycol-ether composite solvent [15]
CN 111954654B
(WO2019149212A1)
2018-02-01 SED-BTX hybrid ED + LLE process for wide C6–C8 cuts [13]
CN 117343758B 2022-06-28 Full-range gasoline (EP <205 °C) C6–C11 aromatics recovery via LLE+ED combination [17]

RIPP's SED technology page additionally lists ten patent applications from 1999 to 2006 underlying the process, including CN 99107785.7 and CN 99108038.6 (1999, extractive distillation of aromatics), CN 00134115.4 (solvent extraction desulfurization of gasoline fractions) and the US counterpart of the composite-solvent patent (US 2003/0080028 A1) [3].


10. Notes and caveats

  • SECCO unit capacity discrepancy: the journal paper reports a 550 kt/a aromatics extraction unit [6], while the 2010 licensor handbook entry lists a 350,000 tpy SED unit at SECCO [1]. The two figures may reflect different capacity bases (feed vs product, or different units of the SECCO complex); the original documents should be consulted for reconciliation.
  • Economic-claim discrepancy: the 2010 handbook states capex/opex about 30% lower than sulfolane LLE [1]; RIPP's technology page states 10–20% [3]. Both are licensor-declared; no independent comparison was located.
  • Dalian unit: the infographic names 大连福佳 (Dalian Fujia) as the 1 Mt/a SED unit commissioned in 2009 [3]; the 2015 RIPP review states the largest single-train SED capacity is 1 Mt/a [9]. The OCR'd review text is garbled at the plant-name position; the Fujia attribution follows the infographic. Fujia's aromatics complex (Dalian Changxing Island, p-xylene producer) is not a SINOPEC subsidiary — SED is also licensed to non-Sinopec operators.
  • RIPP English technology page (Tables 2–5): the 2022 English technology page carrying the licensor's typical product specification and recovery tables is no longer accessible; its process-structure statements were recovered through search-index excerpts. The current Chinese-language SED page (published Aug 17, 2026) and Sinopec's Chinese licensing page with flow diagram were used instead [3][4].
  • SED-BTX patent citation: the 2024 journal paper cites the hybrid-process patent as “CN 11954654, 2023-03-17” [5]; the corresponding publication is CN 111954654B, granted March 17, 2023 [13].
  • Luoyang capacity: the 15,680 t/a design capacity quoted for the Luoyang Phase-II application [8] comes from a secondary abstract; the primary paper was not retrievable and the figure should be treated as reported.
  • Documents still not retrievable (candidates for manual retrieval to strengthen the profile):
    1. Tian Longsheng, Tang Wencheng, Zhao Ming — SED芳烃抽提工艺的开发及工业应用 (Development and industrial application of the SED aromatics extraction process), Proceedings of the CIESC 2008 Petrochemical Annual Meeting, Beijing, 2008, p. 79 — development history and SECCO design details.
    2. Full-text PDF of Zhao Ming et al., 石油炼制与化工 (Petroleum Processing and Petrochemicals), 2024, 55(5): 14–19 — the journal's PDF download is login-gated; would provide the SED-BTX flowsheet, phase-equilibrium data package and plant material balance.
    3. Wang Jingyi, Tian Longsheng — 环丁砜抽提蒸馏—液液抽提组合工艺的工业应用, Petroleum Processing and Petrochemicals, 2002, 33(6): 19–22 — first industrial application of the combined process.
    4. Advances and development of aromatics production technologies for an aromatics complex, Acta Petrolei Sinica (Petroleum Processing Section), 2015, 31(2): 275–281 — context of SED within the SINOPEC aromatics complex; article not retrievable.

11. References

  1. China Petrochemical Technology Co., Ltd. — Sulfolane Extractive Distillation (SED), in Hydrocarbon Processing, Petrochemical Processes 2010 Handbook, Gulf Publishing Company, Aromatics section (2010)
  2. Sinopec Corp. — Sulfolane Extractive Distillation Technology (SED), Products & Service → License → Petrochemical (accessed: Nov 15, 2026)
  3. SINOPEC Research Institute of Petroleum Processing (RIPP) — 环丁砜抽提蒸馏分离芳烃工艺(SED)[Sulfolane Extractive Distillation Process for Aromatics Separation], RIPP technology page, published Aug 17, 2026 (accessed: Nov 15, 2026); earlier posting of the same technology page archived Oct 4, 2025 via the Wayback Machine
  4. Sinopec Corp. — 环丁砜抽提蒸馏分离芳烃工艺(SED)[Sulfolane Extractive Distillation Technology (SED)], Chinese technology-licensing page with process flow diagram (accessed: Nov 15, 2026)
  5. Zhao Ming, Jian Zhongli, Tian Longsheng, Tang Wencheng — Development and Application of Aromatics Extraction and Distillation Process (SED-BTX), Petroleum Processing and Petrochemicals (石油炼制与化工), vol. 55, no. 5, pp. 14–19 (May 2024; received Sep 7, 2023)
  6. Petroleum Processing and Petrochemicals — Industry Application of SED Aromatics Extraction Technology, vol. 39, no. 4, p. 41 (published Apr 12, 2008; received Sep 17, 2007)
  7. ResearchGate — Industry Application of Sulfolane Extraction and Distillation Process at Huizhou Refinery (accessed: Nov 15, 2026)
  8. ResearchGate — Application of Sulfolane Extractive Distillation Process (SED) in Benzene Production (SINOPEC Luoyang Phase II) (accessed: Nov 15, 2026)
  9. Wu Wei — 芳烃联合装置生产技术进展及成套技术开发 [Advances and Development of Aromatics Production Technologies for an Aromatics Complex], Acta Petrolei Sinica (Petroleum Processing Section, 石油学报 · 石油加工), 2015, 31(2): 275–281 (full-text PDF in task folder; OCR'd)
  10. Wang Jingyi, Tian Longsheng — 环丁砜抽提蒸馏—液液抽提组合工艺的工业应用 [Industrial Application of the Combined Sulfolane Extractive Distillation–Liquid-Liquid Extraction Process], Petroleum Processing and Petrochemicals, 2002, 33(6): 19–22 (bibliographic record via citing article; full text not retrievable)
  11. Sinopec Research Institute of Petroleum Processing; China Petroleum & Chemical Corp. (Tian Longsheng, Wu Shijin, Tang Wencheng, Zhao Ming, Zhang Yunming, Bian Zhifeng, Sun Huixia) — CN 1262264A / CN 1125008C: Method for Recovering Aromatics Using a Combined Process of Extractive Distillation and Liquid-Liquid Extraction (filed Feb 1, 2000; granted Oct 22, 2003)
  12. Sinopec Research Institute of Petroleum Processing; China Petroleum & Chemical Corp. (Tian Longsheng, Tang Wencheng, Zhao Ming, Zhang Yunming, Bian Zhifeng, Sun Huixia, Wu Shijin) — US 7,078,580 B2: Process for Separating Aromatics by Extractive Distillation and a Composite Solvent Used Therein (priority Jun 29, 2001; granted Jul 18, 2006)
  13. Sinopec Research Institute of Petroleum Processing; China Petroleum & Chemical Corp. (Tian Longsheng, Zhao Ming, Tang Wencheng, Gao Qing) — CN 111954654B: Method for Separating Aromatic Hydrocarbon by Extractive Distillation (SED-BTX Hybrid) (priority Feb 1, 2018; PCT WO2019149212A1; granted Mar 17, 2023)
  14. Sinopec Research Institute of Petroleum Processing — CN 108997077A: Composite Solvent for Extractive Distillation Separation of Aromatics from Hydrocarbon Mixtures (filed Jun 7, 2017)
  15. Sinopec Research Institute of Petroleum Processing — CN 111978143A: Composite Solvent for Extractive Distillation Separation of Aromatics and Application Thereof (filed May 23, 2019)
  16. Sinopec Research Institute of Petroleum Processing — CN 101091835B: Parallel Heat-Transfer Extractive Distillation Method (filed Jun 22, 2006; granted 2010)
  17. Sinopec Research Institute of Petroleum Processing; China Petroleum & Chemical Corp. — CN 117343758B: Method for Separating Aromatic Hydrocarbon from Gasoline C6+ Fraction (filed Jun 28, 2022; granted May 13, 2025)
  18. ChemNews (China Chemical Industry News) — 石科院芳烃抽提技术获用塔里木二期乙烯项目 [RIPP Aromatics Extraction Technology Applied in the Tarim Phase-II Ethylene Project] (Aug 19, 2026)
  19. ADI Analytics — CMR Chemical Market Resources Newsletter, April 4, 2005: BP Shanghai SECCO JV First of China's Three Ethylene Mega-Projects to Start Up in 2005

Insight Articles
Your insights will be shown here

Simplified SED process flow diagram
Simplified SED process flow diagram
Title Date
Technology Equipment
Content provided by
Transaction Name Date
Modified by UserPic   Kokel, Nicolas 11/18/2026 9:13 AM
Added by UserPic   Kokel, Nicolas 11/17/2026 5:09 PM